Filter By:
Stems

$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high.
- Stack height: 36mm
- Weight: 132g (70mm)

$29.99
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes.
- 6061-T6 cast body construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts
- Blendr ready for seamless accessory integration
- Compatible with Blendr Elite bases and Blendr mounts
- Suitable for use on a road, city, or mountain bike
- Safe for use on carbon steerer tubes and handlebars

$121.00
Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.

$64.99 - $67.99
The perfect fit
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration.
Product details
- Blendr Elite allows seamless accessory integration
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp
- Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec
- Approved for carbon bars and steerer tubes
- Suitable for both MTB or road use
- Includes Blendr mono base and accessory mounts

$274.99
An ultralight OCLV Carbon stem with flush-fit faceplate bands and Blendr integration for a clean look.
The lightweight stem for seamless integration
OCLV Carbon construction of the RSL Blendr stem combines lightweight strength with a classy aesthetic. It's equipped with captured titanium hardware that ensures you never drop bolts again, and the dual-banded faceplate shaves weight and works seamlessly with mounted accessories using the Blendr integration system.
Product details
- Ultra-light OCLV Carbon construction
- Flush-fit 4-bolt dual band bar clamps offer seamless look
- Captured Titanium screws save weight while making installation easy
- Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts
- Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories
- Approved for carbon bars and steerer tubes

$34.99 - $36.99
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp.
- 2-D forged AL-6061-T6
- Four-bolt handlebar clamp
- 41mm height
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
- Weight: 130g-180g

$31.99
Features a wide range of adjustment to dial in your fit.
Ensure a proper fit for the best ride experience.
Product details
- High-quality alloy adjustable stem is quill-style, for use with threaded forks
- Seamless integration with Bontrager's Elite Blendr mount kit, sold separately
- Features 64 degrees of angular adjustment
- 50mm stack height adjustment allows for a wide-range of fit options
- Quill stem length is 180mm

$49.99
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

$99.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength.
- CNC Aluminum
- 0-degree rise for perfect fit on aggressive bike frames
- Extensive CNC machining for weight reduction without impacting strength
- TopLock faceplate design for easy and secure installation

$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware.
First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness.
The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout.
- Material: 3D forged 7075, carbon encased body
- 4 x 4mm coated CrMo steel forward-facing faceplate bolts
- 2 x 4mm coated CrMo steel offset steer tube clamp bolts
- 5Nm torque max on all hardware
- Compatible with all 31.8 bars
- Press-fit clamp design installs and removes like a standard stem
- Angle: 84/6 degree
- Steerer Height: 42mm
- Steerer: 1-1/8”
- Faceplate Width: 42mm
- Matte UD carbon finish
- 126g (110mm)

$37.00 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g

$141.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy.
- Stack height: 36mm
- Weight: 155g (90mm)

$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager XXX Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$99.99
- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars
- Human Factor Design features micro increment size options, tuned to fit any rider size and style
- Human Factor cockpit setup index facilitates tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness
- Shot peen-anodized surface increases strength, durability, and fatigue life
Features:
- Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate
- Rise (°): 0
- Diameter: 31.8mm
- Stack Height: 34mm
- Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm)
- Finish: Shotpeen anodized

$109.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.
- The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar
- Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars
- Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

$59.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines
- Unique style, modern geometry, and rock-solid construction, without the heavy price tag
- Dial your fit with micro-increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike

$33.95 - $45.00
Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance.
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Stem Angle: 30 degrees
- S.H.I.S. Stem Clamp Diameter: 28.6

$99.99
- Intended for XC, Trail and All Mountain use
- Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Bar Clamp Diameter: 35mm
- Stem Angle: -84 deg , +96 deg

$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
- Faceplate eliminates ‘stress risers'

$49.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in.
- Forged and machined from 6061 aluminum
- Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body
- Stack Height: 42mm

$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars.
- Bar Clamp Diameter (mm): 31.8 mm
- Material: Carbon
- S.H.I.S. Stem Clamp Diameter: 28.6
- Stem angle: 0-degree

$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g

$39.99
An oversized 35mm clamp diameter stem suitable for all disciplines of mountain biking.
Oversized strength
The Elite 35 stem is the perfect addition to any mountain bikers' cockpit. Forged from lightweight 6061-T6 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 6061-T6 3D forged aluminum construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- High-strength, corrosion-resistant steel bolts
- Approved for use with carbon handlebars

$29.99
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.
- Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Machined logo on bar clamp

$114.99
A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer.
Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- High-strength, corrosion-resistant steel bolts
- Includes Blendr mono base, Garmin Mount, and Ion Light Mount
- Approved for carbon bars

$599.99
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you.
- Compatible with model year 2016/17 Madone
- Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops
- 100% OCLV carbon fiber construction
- Seamless accessory integration with Blendr
- Blendr accessory bases and mounts sold separately

$36.99
MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards.
- Tested to ISO 4210 Mountain standards
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation

$36.99
MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards.
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate for easy installation
- Bead blasted & anodized black finish

$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
Page 1 of 4
Next page