Parts & Accessories

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Extend the life of your Dummy bags with this replaceable wear patch.

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Surly Front Rack Hardware

Replacement Surly Bicycle Mounted Rack Parts - Direct replacement item for Surly racks - Replacement upper tubes, made from Stainless steel

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Topeak handlebar bag fixer for eBikes with display units.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads